Sennheiser HMDC 27 Closed Circumaural Professional Broadcast Headset With Active Noise Reduction 1/4 Inch & 3 Pin XLR
Original price was: $337.00.$98.99Current price is: $98.99.
- Get the quality you deserve, for less.
- Quality You Can Trust
- Efficiency meets excellence in customer care.
- Safe Payments, Happy Customers
506978 – Overview
The new HMD 27-series invites the Broadcast Commentators and Audio Engineers to experience the highest level of wearing comfort. The top-of-the-line model is the HMDC 27, which features NoiseGard (active noise reduction) to perform well in very loud environments. By actively reducing the noise level by additional 15dB this headset increases intelligibility while at the same time protecting the user’s hearing and avoiding stress and fatigue due to noise. NoiseGard does not require the usual batteries but is conveniently powered via the microphone power supply from the broadcast desk or intercom system. (Phantom powered P48). The headset is similar to the HMS 26 series equipped with the automatically opening two-piece headband, hence no pressure on the sensitive fontanelle. For those users who still prefer a conventional headband, a wide headband padding is included that converts the two-piece headband into a compact single piece. Included with the headset is the Sennheiser II-X3K1 cable. This cable features a short coil to minimize structure born noise. It is reinforced with Kevlar for durability and features a Male XLR-3 pin for the mic connector and a 1/4″ TRS stereo plug for the headphones.This cable is suitable for use with the HMD26 and HMD46 Headsets.
-
Features:
- Active noise compensation (NoiseGard) additionally reduces noise by up to 15 dB. No batteries required: Power supply via microphone bias voltage from the commentator’s unit (P12-P48 as per DIN_EN 61938)
- Highest wearing comfort due to the lightweight circumaural design and the splitted headband (no pressure on the sensitive fontanelle)
- Accurate and linear sound reproduction for very demanding monitoring
- Dynamic Microphone, which stands out due to a strong and powerful sound pattern for an audio transmission in highest broadcast quality even in noisy environments
- ActiveGard (on/off switch) for protected hearing against noise peaks > 110dB
- Modular concept of different cables and boom arms to offer highest flexibility
- Cables of the cable 26-II series are compatible
- Swiveling ear cap for single sided listening
- Microphone can be worn either on right or left hand side
- Wide headband padding is included that converts the two-piece headband into a compact single piece
-
Specifications:
- Impedance: 64 ohms
- Frequency response (microphone): 40 Hz – 18 kHz
- Transducer principle (Microphone): dynamic
- Frequency response (headphones): 8 Hz – 18 kHz
- Microphone: BMD 434
- Max. sound pressure level: ActiveGard Limiter off: 128 dB SPL @ 1 kHz / ActiveGard Limiter on: 110 dB SPL @ 1 kHz
- Contact pressure: approx. 3.3 N
- Ear coupling: circumaural
- Pick-up pattern: Hyper-cardioid
- Microphone sensitivity: 0.5 mV/Pa @ 1 kHz
- Maximum sound pressure level (passiv): 128 dB SPL @ 1 kHz
- ActiveGard: 110 dB SPL @ 1 kHz
- Distortion: 0.1% @ 1 kHz, 100 dB SPL
- Transducer principle (headphones): dynamic, closed
- Weight w/o cable: approx. 240 g
-
Item Includes:
- 1 HMDC 27
- 1 with connection cable II-X3K1
- 1 large headband padding
- 1 wind and pop screen
- 1 cable clip
- 1 QuickGuide
- 1 SafetyGuide
-
GTIN:
0615104277977
Be the first to review “Sennheiser HMDC 27 Closed Circumaural Professional Broadcast Headset With Active Noise Reduction 1/4 Inch & 3 Pin XLR”
Related products
Microphone Accessories
Microphones
Sennheiser XS Lav USB-C Omnidirectional Clip-On Lavalier Microphone With USB-C Connector
Microphone Windscreens
Rycote 066324 Overcovers Advanced – 26mm Fur Discs Only – Bag Of 100 – No Stickies – White
Reviews
There are no reviews yet.